subBanner

Dust Collectors & Cyclones

 
Garnic Technologies dust collectors and cyclones are designed & manufactured mainly for the powder coating industry but can be used in most other industries including abrasive blasting.
 
Garnic Technologies Dust Collectors has the following features:
  • Fully automated Pulse solenoid valves and timer blocks and the system operates as in fully automated reverse pulse mode
  • Fans rated and sized correctly with t 12' wg pressure
  • Garnic Technologies guarantees the Filtration efficiency to be exceptional at 99% on 0.5'm Dust particles. Start up efficiency of 99% on 0.2-2'm dust particles reflects highest industry standard (BIA Class C)
  • The dust collectors are designed to exhaust to the external of the building or recycle through a post filter back to the powder booth to prevent dust displacement within the work area.
  • Air receiver are built to Australian pressure vessel standards
  • A hopper is supplied on the base to collect dust  under a vacuum seal
 
Garnic Technologies Cyclones have the following features: 
  • Sized correctly to reclaim 90-95% of powder for re-use.
  • Swing out base for easy cleaning.
  • Quick disconnect ductwork for easy cleaning
  • Hopper supplied to collect dust powder under a vacuum seal
  • Mini cyclone on base to transfer reclaim powder back to powder hopper
  •  
Dustcollector.JPG
Dust collector
Cyclone.JPG
  Cyclone
Dustcollector2.JPG
Dust Collector
Picture407.jpg
Dust collector for Shot Blasting
3000cfm.jpg

3000 cfm dust collector for laser cutter

IMG_2626.jpg

Portable open face dust collector

IMG_2230.JPG

Open Face Powder Booth

IMG_8706.jpg

Open face Dust collector